您当前位置:
模切货源 >
材料 >
保护膜 >
产品 > 详细内容
[产品] 低粘、中粘、高粘保护膜
有 效 期:永久
产品规格:保护膜
产品数量:未填写
包装说明:未填写
价格说明:未填写
快速联系:0757-27791119 / 康明(先生)
详细说明:
保护膜技术要求
1、低粘要求:适用于平面、光面、镜面不锈钢板材、塑料片材、PMMA、PS板、PC板等产品。
2、中粘要求:适用于不锈钢粗纹磨沙板、雪花板、铝塑板(细纹)、塑钢、铝型材和聚脂板材等产品。
3、高粘要求:适用于难粘特殊产品的保护,铝塑板粗纹、佛碳板和表面不光滑的产品。
A 、宽度:可根据要求订做。
B 、长度:可根据要求订做。
C 、厚度:0.03mm-0.1mm(可订做)。
D 、粘度性:**般0.5N/cm至1.3N/cm。
E 、耐温性:**般耐温60℃/150小时。
F 、伸长率:≥250%
Protective film physical and technical index
1. Low adhesion: suitable for protection of poished stainless steel plate, plastic sheet, PMMA, PS sheet,PC sheet etc.
2. Medium adhesion: suitable for coarse-grained stainless steel plate, PVC profile, polyester plate, fine-grained ground plate etc.
3. Hing adhesion: suitable for protection of substrates that are extremely difficult to be stuck on, such as coarse-grained ground plate, fluocarbate coated materials.
A. Width:customer ordered
B. Length:customer ordered
C. Thickness:0.03mm-0.1mm(can be tailor-made)
D. Adhesion:0.5N/cm-1.3N/cm
E. Heat resistance:60℃/150 hrs
F. Elongation≥250%
分享此模切货源的方式